UniFi OS 3.2.12 includes the improvement and bugfixes listed below.

Bundled application

• UniFi Network 8.0.28

Improvements

• Improved configuring fixed speed on SFP ports when the module has a faulty EEPROM.

Bugfixes

• Fixed the inability to send Identity Standard invites.
• Fixed redundant logging to /dev/tty10.

UniFi OS 3.2.9 includes the Improvements and Bugfixes listed below.

Bundled application

• UniFi Network 8.0.26

Improvements

• Added notice for speed test during web setup.
• Improved stability around backup restoring.
• Improved Identity user experience.
• Improved Shadow Mode.
• Improved SFP connection compatibility with modules that do not have a proper EEPROM.

Identity

• Added the option to enable "Require a Verification Code When Loading a Credential" in the Identity settings. If enabled, users would be required to specify an additional 4-digit code when importing Identity Credentials into Identity Apps.
• Added ability to manage devices that have the Identity App installed in the user's property panel, including status and (re)sending invites.

Bugfixes

• Fixed an issue where RADIUS certificates were changed while One-Click WiFi was disabled.
• Fixed an issue with establishing Site-to-Site VPNs while Ad Blocking is enabled.
• Fixed a gateway configuration error when enabling Country Restrictions.
• Fixed RADIUS validation failure when a password ends with a backslash.
• Fixed an issue where the IPv6 Single Network was sometimes broken when changing the assigned network.
• Fixed an issue where some system logs filled up the disk space completely.

UniFi OS - Dream Machines 3.2.7 adds support for Subscription Free UniFi Identity, Shadow Mode, InnerSpace, VLAN Magic, DNS Shield and Loop Protection. 

Subscription Free UniFi Identity

UniFi Identity is the new on-premises UniFi user management system, offering lightweight, subscription-free, single-site, unlimited-user access via the iOS & Android apps. Set up UniFi Identity via the Admins & Users > Users section. See the UniFi Identity Help Center article for more information. Former UID options are now called UniFi Identity Enterprise.

Shadow Mode

With Shadow Mode on the UDM-SE, you can ensure High Availability (HA) of your network’s gateway to minimize downtime, and provide a reliable failover mechanism in the face of unexpected hardware failures. In this setup, a secondary Cloud Gateway mirrors the configuration of the primary one, and can easily take over full network and management capabilities should it ever fail. See the Shadow Mode Help Center article for more information.

Currently, Shadow Mode operates as a “Warm Spare,” meaning some manual intervention is required, however this will become fully automated in an upcoming release.

InnerSpace

The UniFi InnerSpace Application is a powerful deployment visualization tool that allows you view your UniFi system's WiFi and camera coverage over your own floor plan. InnerSpace replaces the Map option in the Console Settings.

VLAN Magic

With VLAN Magic, you can quickly create a new Virtual Network and associate devices to this VLAN by selecting them on the Topology.

DNS Shield

The new DNS Shield feature ensures privacy and security of DNS traffic by encrypting it using DNS over HTTPS (DoH).

Loop Protection

The new Loop Protection feature automatically disables ports on which loops are detected. It does not depend on Spanning Tree and even works when neighboring devices do not support STP. Enable Loop Protection on all UniFi Gateway and UniFi Switch ports via the Port Manager. Ports that are disabled by Loop Protection need to be manually re-enabled.

Bundled Application

• UniFi Network 7.5.187

Improvements

• Added Subscription Free UniFi Identity.
• Set up UniFi Identity via the Admins & Users > Users section.
• Added Shadow Mode.
• Added InnerSpace application replacing the Map option in the Console Settings.
• Added VLAN Magic.
• Added DNS Shield.
• Added Loop Protection.
• Added support hostname support for IPsec Site-to-Site VPNs.
• Added the console's IP address during setup on the touchscreen.
• Added max login attempts for SSH.
• Entering incorrect credentials 5 times will block for 3 minutes.
• Added fallbacks to default timezones if unsupported ones are provided during setup.
• Added DNS warnings for consoles that cannot resolve the ui.com domain.
• Allow disabling Remote Access where there are connection issues.
• Improved various screens on the Touchscreen.
• Improved detection of failed disks.
• Disks that cannot initialize will be marked as broken.
• Improved RADIUS stability.
• Improved WireGuard VPN Disconnection detection for mobile devices.
• Consoles will no longer erase external storage during a factory reset.
• Updated Suricata to 6.0.12.
• Updated the console reset button count down from 10 seconds to 5 seconds.
• Reduced memory usage of Suspicious Activity, Content Filtering, and Ad Blocking.
• Prevent super admins from deleting their own account.

Backup and Upgrades

• Added DNS resiliency for firmware updates.
• Improved UniFi OS backup resiliency.
• Improved meshing stability when consoles are restarting or upgrading.
• Consoles will now always store backups locally before upgrading the firmware.
• Auto recovery is in place in case there is file system corruption after a power outage.
• Reduced network downtime for firmware upgrades.

Bugfixes

• Fixed an issue where the IPv6 address is lost after interface changes until the next RA.
• Fixed unable to start RADIUS service in rare cases.
• Fixed incorrect WAN IP on the portal after remapping the WAN ports.
• Fixed an issue with DNS servers for VPN Client. This applies to the VPN Client feature, not adding clients to VPN Servers.
• Fixed an issue where servers are not reachable for VPN Client due to incorrect certificates. This applies to the VPN Client feature, not adding clients to VPN Servers.
• Fixed an issue where the default route wasn't present when using a static IP on the WAN port.
• Fixed an issue where IGMP Proxy breaks after PPPoE reconnections.
• Fixed an issue where Traffic Routes didn't take effect for existing connections.
• Fixed an issue where Traffic Routes conflicted with Content Filtering.
• Fixed inability to see DPI statistics for setups with large amounts of clients.
• Fixed unexpected behavior when there are multiple Traffic Rules blocking the same domain.
• Fixed unable to establish IPsec Site-to-Site VPN in rare cases.
• Fixed an issue where jumbo frames are forwarded on LAN ports when Jumbo Frames is disabled.
• Fixed an issue where PPPoE MSS Clamping is lost during provisions.
• Fixed Suspicious Activity not working when enabling Jumbo Frames.

Known issues

• PPPoE WAN2 Is Disabled
• Users that have a PPPoE WAN2 connection and are running UniFi Network v8.0.24 at the time of the UniFi OS update will need to re-enter their PPPoE credentials to regain WAN2 connectivity.
• We are planning to release a new version of UniFi Network to prevent this from happening while we continue to roll out this version of UniFi OS.

UniFi OS - Dream Machine SE 3.1.16 includes the improvements and bugfixes listed below.

Bundled application

• UniFi Network 7.4.162

Improvements

• Added the console's IP address to the touchscreen during setup.
• Improved backup restore resiliency.
• Improved stability of installing dependencies.
• Improved device stability.
• Updated the AR pattern on the touchscreen.
• Renamed UniFi UID to UniFi Identity.

Bugfixes

• Fixed high CPU usage caused by Traffic Identification.
• Fixed an issue where jumbo frames were being forwarded to LAN ports while it was disabled.
• Fixed unable to reach the internal subnet from L2TP/Teleport VPN Clients.
• Fixed routing table issue when both WANs are configured with the same subnet.
• Fixed issue where QoS on WAN1 affects WAN2 traffic.

UniFi OS 3.1.15 includes the improvements and bugfixes listed below.

Bundled application

• UniFi Network 7.4.162

Improvements

• Added notifications for settings changes.
• Added disk warning when a space IO error occurs.
• Added lifespan support for KINGSTON OCP0S31024Q-A0 SSDs.
• Added notifications for changing SSH passwords in System Logs.
• Added support for IGMP Proxy.
• Added LCM/LED settings to Console settings.
• Added an Internet health widget in the dashboard.
• Added support for modifying the local admin avatar.
• Added more NTP servers.
• Allow grouping devices.
• Allow editing Local Credential when an admin has both UI Account and Local Credential.
• Allow local login using cached UI Account credentials while remote services are down.
• Improved IPsec Site-to-Site VPN stability.
• Improved Admins page UX.
• Improved internet check resiliency.
• Improved stability for installing and upgrading applications.
• Improved storage-related notifications.
• Improved login failure messages.
• Improved UniFi OS update resiliency.
• Improved SSH password validation.
• Improved remote connection resiliency.
• Improved PPPoE connection stability when IP6CP negotiation fails.
• Improved firmware download process.
• Improved Remote Access Login failure reason detection.
• Improved UX for Custom Role editing on mobile devices.
• Improved stability.
• Improved setup UX via mobile apps.
• Removed the Early Access badge from the Connect application.
• Migrated Direct Remote access feature to UniFi OS.
• Changed the default credentials to ui/ui.
• Uninstalled applications no longer back up.
• Applications are no longer bundled by default. Instead, required applications will prompt to install when new devices are detected.

Setup

• Allow users to restore specific applications during console setup and in the settings.
• Improved setup speed.
• Updated references to UniFi App on screen while waiting for setup.
• Updated the Privacy and Security page during setup.
• Updated the UI logo during setup and on the screen.
• Disconnect all SSH sessions after setup.

Backup

• Allow restoring backups between different console models.
• Improved Cloud Backup UX.
• Improved backup restore resiliency
• Redirect to the new subnet if the subnet is different after restoring a backup.
• Keep network settings from the setup wizard when restoring a backup file during setup.
• Create backups even if some of the applications fail to export. Failures are reported in the system log.

Bugfixes

• Fixed an issue where MSS Clamping was not applied to the console's outgoing traffic.
• Fixed camera permission assignment issue when doing it through UID.
• Fixed an issue where "Transfer Ownership" would appear for the old owner after transferring ownership. The button did not work for the previous owner.
• Fixed DHCP unicast renew not using the CoS parameter.
• Fixed broken avatars in rare cases.
• Fixed disabled applications are starting after a reboot.
• Fixed missing WiFi Channel information in some cases.
• Fixed some threats that were not being blocked correctly.
• Fixed an issue where Traffic Identification would stop working after some time.
• Fixed console might appear as Offline in the Network application when it fails to fetch Geo-Location data.
• Fixed Suspicious Activity consuming high memory in rare cases.
• Fixed rare Traffic Rules scheduling issues when selecting Saturday and Sunday.
• Fixed missing console update notifications.
• Fixed wireless scheduling.
• Fixed unable to load backups during setup in rare cases.
• Fixed timezone validation issue, preventing console setups.
• Fixed link issue when using a UF-RJ45-1G module.
• Fixed rare ulogd crash.

VPN

• Fixed network connectivity loss when remote OpenVPN Client subnet conflicts with local subnets.
• Fixed an issue where the interface for Teleport VPN stays when disabling the feature.
• Fixed DNS leak when using Mullvad VPN.
• Fixed unable to establish Site-to-Site VPNs using DH groups 19, 20, 21, 25, 26, 27, 28, 29, 30, 31, 32.

Bundled applications

• UniFi Network 7.3.83
• UniFi Protect 2.6.17
• UniFi Talk 1.18.9
• UniFi Access 1.4.11
• UID Agent 1.53.4

Improvements

• Improve PPPoE Connection stability when IP6CP negotiation fails.
• Update UI logo on LCM.
• Update UNC count threshold to 5 for disk-at-risk warnings.
• Disconnect all SSH sessions after setup.

Bugfixes

• Fix rare UniFi OS Crash when disabling applications.
• Fix timezone validation issue, preventing console setups.
• Fix allow-list for AD blocking, requires Network application 7.4 or newer.
• Fix PoE cycle function.
• Fix issue related to IGMP snooping.
• Fix a rare kernel crash when setting an SFP+ port to a fixed speed.
• Fix connection issues with some GPON modules.

* This is a rolling release, everyone will get it in the coming days!

Bundled applications

• UniFi Network 7.3.76
• UniFi Protect 2.6.17
• UniFi Talk 1.18.2
• UniFi Access 1.4.9
• UID Agent 1.51.3

Improvements

• Redesign UniFi OS Application page.
• Add Admin Activity to System Log in UniFi OS.
• Add Storage events to System Log in UniFi OS.
• Add Cloud connection events to System Log in UniFi OS.
• Add Trigger logs in the Network Application.
• Add VPN Client Routing.
• Add Ad-blocking feature.
• Add Wireguard VPN Server support.
• Add OpenVPN tunnel in traffic rules.
• Add support for DHCP Client option 77 and 90.
• Add support for OpenVPN tunnel in Traffic Routes.
• Allow adding multiple VPN Clients.
• Upgrade WAN RJ45 port driver.
• Upgrade Debian distribution to Bullseye.
• Upgrade NodeJS to 16.14.2.
• Upgrade PostgreSQL to 14.5-1.
• Update password rules for local account.
• At least 12 characters.
• Allow to have a space.
• Only allow strong strength level passwords.
• Update DPI Signatures.
• Update GeoIP Database.
• Update Suricata configuration for Threat Management.
• Improve mechanism for detecting disk insert and remove event.
• Improve connection stability between console and Network application.
• Improve landing page during setup.
• Improve UX for Config Backup Restore during setup.
• Improve UX for creating UI.com account during setup.
• Improve the performance checking firmware and application updates.
• Improve stability for direct connection.
• Improve disk formatting flow for when console is reset with disk inserted.
• Improve UniFi OS backup restore resiliency.
• Improve email and push notification stability.
• Improve PPPoE performance on RJ45 2.5G WAN port.
• Improve SFP+ Link speed auto-detect feature.
• Auto-update all installed applications including non-setup applications when auto-update for applications is enabled.
• Disable application actions during console bootup.
• Correctly re-enable the application to match the backup state after the backup restore.
• Check for application updates immediately after switching the Release channel.
• Prevent downgrading to firmware versions older than 3.0.9.
• Persist console invitation after console reboot.
• Disable application accordingly to match the state in backup file after restore.
• Disable email notification in UniFi OS for new installs. (push notifications enabled by default)
• Decrease amount of DNS traffic to bare minimum via U-LTE when it is not active.
• Optimize DNS Filtering events to prevent spamming and CPU Consumption.
• Report OpenVPN Site-to-Site VPN events to the Network application.
• Monitor Disk UNC error.
• Change menu title to uppercase on LCM.
• Change splash screen title to "Starting" on LCM.
• Show MAC address in "No Internet Detected" screen for initial setup.
• Show ISP name in Internet related error screens.

Bugfixes

• Fix scheduled traffic rule issues related to DST.
• Fix incorrect application installation status detection in UniFi OS.
• Fix timezone validation for some cities (e.g. Kiev <=> Kyiv).
• Fix wrong "Power on Hours" value for some disk models.
• Fix "Restore Console with a Backup File" page during setup when there is huge number of backups.
• Fix auto negotiation issue with the UACC-CM-RJ45 module.
• Fix corrupted IPsec Site-to-Site VPN rx/tx counters when the number reaches to 2Gb.
• Fix issue modifying existing domain based traffic rule.
• Fix issue that LTE WAN failover state not showing correctly on Network Application.
• Fix WAN failover when WAN1 is link up but with bad health.
• Fix issue that Network may not show the right L2TP VPN client.
• Fix not removing some configurations when removing a U-LTE device.
• Fix stopped applications start-up automatically after disk reformed or disk re-plug during runtime.
• Enable/Disable the application after updating it to match your preference.
• Restore auto-update settings after restoring UniFi OS backup.
• Avoid repeated application update notifications for the same version.

Additional information

• You must be on 2.5.x or newer before you apply this update, or else you may encounter unknown issues.

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: 614a94f6b6cda3eb715a16c4230f910d
sha256: b07741d0493bda486841a4c74e8574a7ffaaf0af64c1e775215558b84f5f0498

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 7.2.91
• UniFi Protect 2.1.2
• UniFi Talk 1.17.2
• UniFi Access 1.4.5
• UID Agent 1.49.4+1951

Improvements

• Add email validation for UI account creation during setup.
• Add Hard Drive Issues notifications to UniFi OS.
• Add visual icons for UID and Connect during backup restore.
• Add support for remote syslog.
• Add memory limits for the Network application.
• Add Load Balancing support.
• Improve compatibility with the UACC-CM-RJ45-MG module.
• Improve firmware upgrade stability from the UI.
• Improve speedtest stability.
• Improve UX when installing and updating applications.
• Improve Remote Access connection stability.
• Improve DPI performance.
• Limit restoring local backups only from the same console model.
• Backup restore will skip restoring the backup schedule if remote access is disabled.
• Provide previous subnet information when detecting existing subnet during setup.
• Block poweroff and console reboot actions in UniFi OS when applications are installing or updating.
• Show SSD lifespan in UniFi OS (for setups with SSD).
• Auto detect link speed for SFP+ ports.
• Upgrade Suricata to 6.0.5.

Bugfixes

• Fix getting the wrong Config Backup list after console owner transfer.
• Fix inaccurate timezone converting causing schedule issues for Scheduled Traffic Rules.
• Fix showing false "Insert Network Cable" screen on LCM when only using WAN2 (SFP+).
• Fix Bluetooth disconnecting issue when setting up MAC Address Clone with the Mobile app.
• Fix gateway configuration error when using Jumbo Frames and having Port 9 set to LAN.
• Fix Load Balancing doesn't work after remapping WAN ports.
• Fix showing incorrect WAN IP in the UniFi OS settings after remapping WAN ports.
• Fix race condition when configuring Honeypot.
• Fix DNS Cache (dnsmasq) issue when using PPPoE.
• Fix inaccurate timestamp for latest cloud backup.
• Fix log rotate for firewall logs.
• Display right IP address on UOS when using PPPoE.
• Fix issue where the topology page is broken in some cases.

Known issues

• Auto-negotiation may not work when using the UACC-CM-RJ45-MG module. Instead, configure a fixed speed.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: f0c3eb2f339535beb1e8903eb0552247
sha256: 40408c6e46d2215227b1ee46bca104fb27cbeddded031b164c35277c533ccb6d

Bundled applications

• UniFi Network 7.1.68
• UniFi Protect 1.21.6
• UniFi Talk 1.16.2
• UniFi Access 1.4.3

Improvements

• Improve firmware upgrade stability from the UI.

Bugfixes

• Fix an issue where the topology page is broken in some cases.
• Fix an issue with deleting RADIUS profiles.
• Fix Bluetooth disconnecting issue when setting up MAC Address Clone with the Mobile app.
• Fix wrong scheduling for time-based Traffic Management rule.

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: e2bc96122a62cb941a03354a116cf61e
sha256: 1ac8574852cd86825125e5ac94882b666638a42f1dbd3f25a79da75d4d00e36f

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 7.1.66
• UniFi Protect 1.21.6
• UniFi Talk 1.15.5
• UniFi Access 1.4.2

Improvements

• Improve DPI performance.

Bugfixes

• Fix issue where backup restore progress bar goes out of bounds.
• Fix issue where Admins with a custom role couldn't perform certain actions in UniFi OS settings.

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: 1957d62ab5b6141495c9135ed66921d6
sha256: ea6da138eff91207be921d21af50f4e978ca0d8ae5414b6ef7a70a37a7cc7969

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 7.1.65
• UniFi Protect 1.21.6
• UniFi Talk 1.15.3
• UniFi Access 1.4.2

Improvements

• Add latency monitoring feature for the UniFi Network application.
• Improve stability for cloud backup and local backup.

Bugfixes

• Fix time-based firewall scheduler.

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: cb652da980132faa7e75bb5f9f8592ae
sha256: 1612e01d45ed0edad7573951e99a82f6da39f8b6fa91e127b8d209adfa2efd30

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 7.1.61
• UniFi Protect 1.21.5
• UniFi Talk 1.15.1
• UniFi Access 1.3.38

Improvements

• Redesign UniFi OS Settings
• Add support for updating applications via the LCM.
• Add SSD storage info to the "About this Console" page.
• Add support for WAN/LAN remapping on ports 8-11.
• Add support to disable weak ciphers for L2TP VPN.
• Add teleport VPN support.
• Add support for IGMP snooping on the switch ports.
• Add support for Multi-factor Authentication (MFA).
• Add support file download progress indicator.
• Add support for backing up the console/restoring backups when remote access is disabled.
• Allow configuring SFP speed during setup.
• Allow to reformat disk from the UniFi OS settings.
• Allow to update applications when it is not running.
• Improve UX in UniFi OS Settings when remote access is disabled.
• Improve messaging when failing to authorize locally.
• Improve compatibility to ISP using IPv6.
• Improve remote access stability.
• Improve Network Application reliability.
• Upload cloud backup before performing a firmware update.
• Update UX design for the count-down pages on LCM.
• Update UX design for boot issue screens on LCM.
• Update DPI database.
• Update app switcher for the local portal.
• Upgrade node to node 16 LTS.
• Include LCM settings in cloud backups.
• Minor LCM fixes and improvements
• Show actionable feedback when enabling Remote Access fails.
• Trim application version numbers in UniFi OS settings.
• Require to agree to TOS to enable SSH.
• Enable application updates by default on fresh setups.
• Don't allow to transfer ownership to de-activated accounts.
• Show location only if it's a valid address.
• Remove weak ciphers' support from the WiFiman service.
• Remove TLS1.0 and TLS1.1 support for guest portals.

Bugfixes

• Fix issue with enabling cloud backups after transferring ownership of the console.
• Fix S2S VPN disconnection issue when teleport client connects.
• Fix issue that content filtering doesn't work for wired client in guest portal enabled network
• Fix issues related to Cloud backups.
• Fix issue where the upgrade process may not proceed after clicking the upgrade button in some rare cases.
• Fix issue where the support file may not generate in some rare cases.
• Fix the "Term and Conditions" and "Privacy Policy" pages during setup.
• Fix issue where LCM randomly shows blank page after a restart.
• Fix spamming arping message in log files.
• Fix an issue where Chromecast speaker groups cross VLAN don't work.
• Fix an issue where content filtering may not work as expected.
• Fix IPv6 issue when GeoIP filtering is enabled.

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: e0c90a8079e6bfd9c2d368ed592ecda8
sha256: 7f488e7627b79a3e38118c094e76ac07d75b885c5ee6bf868aa9d27bad6f22cc

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 6.5.55
• UniFi Protect 1.20.3
• UniFi Talk 1.13.8
• UniFi Access 1.3.37

Improvements

• Upgrade Suricata for IPS to 6.0.4.

Bugfixes

• Fix Slow Remote Access connections and Protect Video streaming.
• Fix Release Candidates releases appearing on the Official release channel.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: 0eb421898be6d0e3df2e2ccc529bfdbf
sha256: 181ad0a92d8c2a5efe190bf7cfdec3eb396f9f26f6e826d51bc5b9ed7f5141a1

* This is a rolling release, everyone will receive it in the coming days!

Bundled applications

• UniFi Network 6.5.55
• UniFi Protect 1.20.3
• UniFi Talk 1.13.8
• UniFi Access 1.3.37

Improvements

• Add support for no internet console setup.

Bugfixes

• Fix issue where UniFi OS could become unavailable.
• Fix high CPU usage when the console has a lot of User accounts.

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: 434f38b7d7f980f164385cfed9f3a4c1
sha256: 4ab67f37956b61a201979a65ba4f513d0678bc048554a2f26653a4e39d455491

* This is the first GA firmware release for the UDM-SE.

Bundled applications

• UniFi Network 6.5.55
• UniFi Protect 1.20.3
• UniFi Talk 1.13.4
• UniFi Access 1.3.35

Additional information

Manual upgrade instructions

SSH into your UDM-SE and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-systool fwupdate <firmware_url>

UDM-SE Checksum

md5: 76a09134f4f38ec73a617586d16dc121
sha256: 97a9eae75489b45aa53278c823fc86318fd5841b988e36b336c526fa0d97f6ff